[Checkins] SVN: persistent/trunk/ Initial setuptools / buildout hair for persistent.
Tres Seaver
tseaver at palladion.com
Fri Sep 19 11:07:40 EDT 2008
Log message for revision 91276:
Initial setuptools / buildout hair for persistent.
Changed:
A persistent/trunk/
A persistent/trunk/CHANGES.txt
A persistent/trunk/COPYRIGHT.txt
A persistent/trunk/LICENSE.txt
A persistent/trunk/README.txt
A persistent/trunk/buildout.cfg
A persistent/trunk/ez_setup.py
A persistent/trunk/setup.py
-=-
Added: persistent/trunk/CHANGES.txt
===================================================================
--- persistent/trunk/CHANGES.txt (rev 0)
+++ persistent/trunk/CHANGES.txt 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,8 @@
+Changes
+=======
+
+1.0 (unreleased)
+----------------
+
+* Initial release, branched from ZODB trunk on 2009-09-18 (aka
+ "3.9.0dev").
Added: persistent/trunk/COPYRIGHT.txt
===================================================================
--- persistent/trunk/COPYRIGHT.txt (rev 0)
+++ persistent/trunk/COPYRIGHT.txt 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,2 @@
+Copyright (c) 2008 Zope Corporation and Contributors.
+All Rights Reserved.
Added: persistent/trunk/LICENSE.txt
===================================================================
--- persistent/trunk/LICENSE.txt (rev 0)
+++ persistent/trunk/LICENSE.txt 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,54 @@
+Zope Public License (ZPL) Version 2.1
+-------------------------------------
+
+A copyright notice accompanies this license document that
+identifies the copyright holders.
+
+This license has been certified as open source. It has also
+been designated as GPL compatible by the Free Software
+Foundation (FSF).
+
+Redistribution and use in source and binary forms, with or
+without modification, are permitted provided that the
+following conditions are met:
+
+1. Redistributions in source code must retain the
+ accompanying copyright notice, this list of conditions,
+ and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the accompanying
+ copyright notice, this list of conditions, and the
+ following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+3. Names of the copyright holders must not be used to
+ endorse or promote products derived from this software
+ without prior written permission from the copyright
+ holders.
+
+4. The right to distribute this software or to use it for
+ any purpose does not give you the right to use
+ Servicemarks (sm) or Trademarks (tm) of the copyright
+ holders. Use of them is covered by separate agreement
+ with the copyright holders.
+
+5. If any files are modified, you must cause the modified
+ files to carry prominent notices stating that you changed
+ the files and the date of any change.
+
+Disclaimer
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ``AS IS''
+ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
+ NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ NO EVENT SHALL THE COPYRIGHT HOLDERS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ DAMAGE.
Added: persistent/trunk/README.txt
===================================================================
--- persistent/trunk/README.txt (rev 0)
+++ persistent/trunk/README.txt 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,6 @@
+=================
+Persistet objects
+=================
+
+This package contains a generic persistence implementation for Python. It is
+mainly used by the ZODB, though.
Added: persistent/trunk/buildout.cfg
===================================================================
--- persistent/trunk/buildout.cfg (rev 0)
+++ persistent/trunk/buildout.cfg 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,7 @@
+[buildout]
+develop = .
+parts = test
+
+[test]
+recipe = zc.recipe.testrunner
+eggs = persistent
Added: persistent/trunk/ez_setup.py
===================================================================
--- persistent/trunk/ez_setup.py (rev 0)
+++ persistent/trunk/ez_setup.py 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,234 @@
+#!python
+"""Bootstrap setuptools installation
+
+If you want to use setuptools in your package's setup.py, just include this
+file in the same directory with it, and add this to the top of your setup.py::
+
+ from ez_setup import use_setuptools
+ use_setuptools()
+
+If you want to require a specific version of setuptools, set a download
+mirror, or use an alternate download directory, you can do so by supplying
+the appropriate options to ``use_setuptools()``.
+
+This file can also be run as a script to install or upgrade setuptools.
+"""
+import sys
+DEFAULT_VERSION = "0.6c7"
+DEFAULT_URL = "http://pypi.python.org/packages/%s/s/setuptools/" % sys.version[:3]
+
+md5_data = {
+ 'setuptools-0.6b1-py2.3.egg': '8822caf901250d848b996b7f25c6e6ca',
+ 'setuptools-0.6b1-py2.4.egg': 'b79a8a403e4502fbb85ee3f1941735cb',
+ 'setuptools-0.6b2-py2.3.egg': '5657759d8a6d8fc44070a9d07272d99b',
+ 'setuptools-0.6b2-py2.4.egg': '4996a8d169d2be661fa32a6e52e4f82a',
+ 'setuptools-0.6b3-py2.3.egg': 'bb31c0fc7399a63579975cad9f5a0618',
+ 'setuptools-0.6b3-py2.4.egg': '38a8c6b3d6ecd22247f179f7da669fac',
+ 'setuptools-0.6b4-py2.3.egg': '62045a24ed4e1ebc77fe039aa4e6f7e5',
+ 'setuptools-0.6b4-py2.4.egg': '4cb2a185d228dacffb2d17f103b3b1c4',
+ 'setuptools-0.6c1-py2.3.egg': 'b3f2b5539d65cb7f74ad79127f1a908c',
+ 'setuptools-0.6c1-py2.4.egg': 'b45adeda0667d2d2ffe14009364f2a4b',
+ 'setuptools-0.6c2-py2.3.egg': 'f0064bf6aa2b7d0f3ba0b43f20817c27',
+ 'setuptools-0.6c2-py2.4.egg': '616192eec35f47e8ea16cd6a122b7277',
+ 'setuptools-0.6c3-py2.3.egg': 'f181fa125dfe85a259c9cd6f1d7b78fa',
+ 'setuptools-0.6c3-py2.4.egg': 'e0ed74682c998bfb73bf803a50e7b71e',
+ 'setuptools-0.6c3-py2.5.egg': 'abef16fdd61955514841c7c6bd98965e',
+ 'setuptools-0.6c4-py2.3.egg': 'b0b9131acab32022bfac7f44c5d7971f',
+ 'setuptools-0.6c4-py2.4.egg': '2a1f9656d4fbf3c97bf946c0a124e6e2',
+ 'setuptools-0.6c4-py2.5.egg': '8f5a052e32cdb9c72bcf4b5526f28afc',
+ 'setuptools-0.6c5-py2.3.egg': 'ee9fd80965da04f2f3e6b3576e9d8167',
+ 'setuptools-0.6c5-py2.4.egg': 'afe2adf1c01701ee841761f5bcd8aa64',
+ 'setuptools-0.6c5-py2.5.egg': 'a8d3f61494ccaa8714dfed37bccd3d5d',
+ 'setuptools-0.6c6-py2.3.egg': '35686b78116a668847237b69d549ec20',
+ 'setuptools-0.6c6-py2.4.egg': '3c56af57be3225019260a644430065ab',
+ 'setuptools-0.6c6-py2.5.egg': 'b2f8a7520709a5b34f80946de5f02f53',
+ 'setuptools-0.6c7-py2.3.egg': '209fdf9adc3a615e5115b725658e13e2',
+ 'setuptools-0.6c7-py2.4.egg': '5a8f954807d46a0fb67cf1f26c55a82e',
+ 'setuptools-0.6c7-py2.5.egg': '45d2ad28f9750e7434111fde831e8372',
+}
+
+import sys, os
+
+def _validate_md5(egg_name, data):
+ if egg_name in md5_data:
+ from md5 import md5
+ digest = md5(data).hexdigest()
+ if digest != md5_data[egg_name]:
+ print >>sys.stderr, (
+ "md5 validation of %s failed! (Possible download problem?)"
+ % egg_name
+ )
+ sys.exit(2)
+ return data
+
+
+def use_setuptools(
+ version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+ download_delay=15
+):
+ """Automatically find/download setuptools and make it available on sys.path
+
+ `version` should be a valid setuptools version number that is available
+ as an egg for download under the `download_base` URL (which should end with
+ a '/'). `to_dir` is the directory where setuptools will be downloaded, if
+ it is not already available. If `download_delay` is specified, it should
+ be the number of seconds that will be paused before initiating a download,
+ should one be required. If an older version of setuptools is installed,
+ this routine will print a message to ``sys.stderr`` and raise SystemExit in
+ an attempt to abort the calling script.
+ """
+ try:
+ import setuptools
+ if setuptools.__version__ == '0.0.1':
+ print >>sys.stderr, (
+ "You have an obsolete version of setuptools installed. Please\n"
+ "remove it from your system entirely before rerunning this script."
+ )
+ sys.exit(2)
+ except ImportError:
+ egg = download_setuptools(version, download_base, to_dir, download_delay)
+ sys.path.insert(0, egg)
+ import setuptools; setuptools.bootstrap_install_from = egg
+
+ import pkg_resources
+ try:
+ pkg_resources.require("setuptools>="+version)
+
+ except pkg_resources.VersionConflict, e:
+ # XXX could we install in a subprocess here?
+ print >>sys.stderr, (
+ "The required version of setuptools (>=%s) is not available, and\n"
+ "can't be installed while this script is running. Please install\n"
+ " a more recent version first.\n\n(Currently using %r)"
+ ) % (version, e.args[0])
+ sys.exit(2)
+
+def download_setuptools(
+ version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+ delay = 15
+):
+ """Download setuptools from a specified location and return its filename
+
+ `version` should be a valid setuptools version number that is available
+ as an egg for download under the `download_base` URL (which should end
+ with a '/'). `to_dir` is the directory where the egg will be downloaded.
+ `delay` is the number of seconds to pause before an actual download attempt.
+ """
+ import urllib2, shutil
+ egg_name = "setuptools-%s-py%s.egg" % (version,sys.version[:3])
+ url = download_base + egg_name
+ saveto = os.path.join(to_dir, egg_name)
+ src = dst = None
+ if not os.path.exists(saveto): # Avoid repeated downloads
+ try:
+ from distutils import log
+ if delay:
+ log.warn("""
+---------------------------------------------------------------------------
+This script requires setuptools version %s to run (even to display
+help). I will attempt to download it for you (from
+%s), but
+you may need to enable firewall access for this script first.
+I will start the download in %d seconds.
+
+(Note: if this machine does not have network access, please obtain the file
+
+ %s
+
+and place it in this directory before rerunning this script.)
+---------------------------------------------------------------------------""",
+ version, download_base, delay, url
+ ); from time import sleep; sleep(delay)
+ log.warn("Downloading %s", url)
+ src = urllib2.urlopen(url)
+ # Read/write all in one block, so we don't create a corrupt file
+ # if the download is interrupted.
+ data = _validate_md5(egg_name, src.read())
+ dst = open(saveto,"wb"); dst.write(data)
+ finally:
+ if src: src.close()
+ if dst: dst.close()
+ return os.path.realpath(saveto)
+
+def main(argv, version=DEFAULT_VERSION):
+ """Install or upgrade setuptools and EasyInstall"""
+
+ try:
+ import setuptools
+ except ImportError:
+ egg = None
+ try:
+ egg = download_setuptools(version, delay=0)
+ sys.path.insert(0,egg)
+ from setuptools.command.easy_install import main
+ return main(list(argv)+[egg]) # we're done here
+ finally:
+ if egg and os.path.exists(egg):
+ os.unlink(egg)
+ else:
+ if setuptools.__version__ == '0.0.1':
+ # tell the user to uninstall obsolete version
+ use_setuptools(version)
+
+ req = "setuptools>="+version
+ import pkg_resources
+ try:
+ pkg_resources.require(req)
+ except pkg_resources.VersionConflict:
+ try:
+ from setuptools.command.easy_install import main
+ except ImportError:
+ from easy_install import main
+ main(list(argv)+[download_setuptools(delay=0)])
+ sys.exit(0) # try to force an exit
+ else:
+ if argv:
+ from setuptools.command.easy_install import main
+ main(argv)
+ else:
+ print "Setuptools version",version,"or greater has been installed."
+ print '(Run "ez_setup.py -U setuptools" to reinstall or upgrade.)'
+
+
+
+def update_md5(filenames):
+ """Update our built-in md5 registry"""
+
+ import re
+ from md5 import md5
+
+ for name in filenames:
+ base = os.path.basename(name)
+ f = open(name,'rb')
+ md5_data[base] = md5(f.read()).hexdigest()
+ f.close()
+
+ data = [" %r: %r,\n" % it for it in md5_data.items()]
+ data.sort()
+ repl = "".join(data)
+
+ import inspect
+ srcfile = inspect.getsourcefile(sys.modules[__name__])
+ f = open(srcfile, 'rb'); src = f.read(); f.close()
+
+ match = re.search("\nmd5_data = {\n([^}]+)}", src)
+ if not match:
+ print >>sys.stderr, "Internal error!"
+ sys.exit(2)
+
+ src = src[:match.start(1)] + repl + src[match.end(1):]
+ f = open(srcfile,'w')
+ f.write(src)
+ f.close()
+
+
+if __name__=='__main__':
+ if len(sys.argv)>2 and sys.argv[1]=='--md5update':
+ update_md5(sys.argv[2:])
+ else:
+ main(sys.argv[1:])
+
+
+
+
+
Added: persistent/trunk/setup.py
===================================================================
--- persistent/trunk/setup.py (rev 0)
+++ persistent/trunk/setup.py 2008-09-19 15:07:40 UTC (rev 91276)
@@ -0,0 +1,92 @@
+##############################################################################
+#
+# Copyright (c) 2008 Zope Corporation and Contributors.
+# All Rights Reserved.
+#
+# This software is subject to the provisions of the Zope Public License,
+# Version 2.1 (ZPL). A copy of the ZPL should accompany this distribution.
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED
+# WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS
+# FOR A PARTICULAR PURPOSE.
+#
+##############################################################################
+
+__version__ = '1.0a1'
+
+import os
+
+from ez_setup import use_setuptools
+use_setuptools()
+
+from setuptools import Extension
+from setuptools import find_packages
+from setuptools import setup
+
+
+here = os.path.abspath(os.path.dirname(__file__))
+README = (open(os.path.join(here, 'README.txt')).read()
+ + '\n\n' +
+ open(os.path.join(here, 'CHANGES.txt')).read())
+
+setup(name='persistent',
+ version=__version__,
+ description='Translucent persistent objects',
+ long_description=README,
+ classifiers=[
+ "Development Status :: 6 - Mature",
+ "License :: OSI Approved :: Zope Public License",
+ "Programming Language :: Python",
+ "Topic :: Database",
+ "Topic :: Software Development :: Libraries :: Python Modules",
+ "Operating System :: Microsoft :: Windows",
+ "Operating System :: Unix",
+ ],
+ author="Zope Corporation",
+ author_email="zodb-dev at zope.org",
+ url="http://www.zope.org/Products/ZODB",
+ license="ZPL 2.1",
+ platforms=["any"],
+ packages=find_packages(),
+ include_package_data=True,
+ zip_safe=False,
+ ext_modules = [Extension(name = 'persistent.cPersistence',
+ sources= ['persistent/cPersistence.c',
+ 'persistent/ring.c',
+ ],
+ depends = ['persistent/cPersistence.h',
+ 'persistent/ring.h',
+ 'persistent/ring.c',
+ ]
+ ),
+ Extension(name = 'persistent.cPickleCache',
+ sources= ['persistent/cPickleCache.c',
+ 'persistent/ring.c'
+ ],
+ depends = ['persistent/cPersistence.h',
+ 'persistent/ring.h',
+ 'persistent/ring.c',
+ ]
+ ),
+ Extension(name = 'persistent.TimeStamp',
+ sources= ['persistent/TimeStamp.c',
+ ],
+ ),
+ ],
+ headers = ['persistent/cPersistence.h',
+ 'persistent/ring.h'],
+ tests_require = [
+ 'zope.interface',
+ 'zope.testing>=3.7dev',
+ ],
+ test_loader="zope.testing.testrunner.eggsupport:SkipLayers",
+ test_suite="persistent.tests",
+ install_requires=[
+ 'zope.interface',
+ ],
+ entry_points = """\
+ [distutils.commands]
+ ftest = zope.testing.testrunner.eggsupport:ftest
+ """
+ )
+
More information about the Checkins
mailing list