[Zope] Zope Won't Start

Duncan Kinder dckinder@mountain.net
Tue, 7 Sep 1999 12:17:54 -0700


I got it to work, but the protocol was a bit odd.

My Linux box is IP 1.1.1.3  and calls itself "linux.workgroup"   This is
what Zope calls it in its startup.

I always log onto Apache at 1.1.1.3, ignoring the "linux.workgroup"
identification. (It's easier.)

I just  tried to log onto apache as "linux.workgroup"  and failed,
notwithstanding my success using 1.1.1.3.

So I tried to log onto Apache as "linux,"  which is what Samba calls my
Linux box.  That worked.

Then I tried "linux:8080."  That also worked.  Zope emerged.

I am glad to be up and running, but think it would be a good idea to allow
one to use the IP address to log onto Zope.

Just a suggestion.


Regards,

Duncan C. Kinder
dckinder@mountain.net



----- Original Message -----
From: Scott Anderson <sanderson@ttm.com>
To: <dckinder@mountain.net>; <zope@zope.org>
Sent: Tuesday, September 07, 1999 8:52 AM
Subject: Re: [Zope] Zope Won't Start


> Zope has to run as a user authorized to change that file.
>
> You can start zope with "./start -u <some user name with the proper
> perms>".
>
> Try "./start -u root" just to see if it works.
>
> Hope this helps,
>
> -scott
>
> dckinder@mountain.net wrote:
> >
> > I have just installed Zope in Redhat 5.2.
> >
> > As root, I typed "./install"
> >
> > Then "./start."
> >
> > In response I get :
> >
> > ZServers Medusa (V.10) started at Tue Sep 7 11:21:40 1999
> > Hostname :  linux.workgroup
> > Port: 8080
> >
> > ..ZServer FTP server started at Tue Sep 7 11:21:40 19999
> > Autorizer: none
> > Hostname:  linux.workgroup
> > Port: 8021
> >
> > Zserver Monitor Server (V1.5) started on port 8900 Traceback(innermost
> > last):
> >
> > File/"home/dckinder/download/Zope-2.0.0-linux2-x86/z2.py". line 494, in
?
> > 18 Error: {Errno 131 Permission denied:
> > '/home/dckinder/download/Zope-2.0.0-linux2-x86/var/Z2.pid'
> >
> > When I attempt to log on using either http://linux.workgroup:8080/manage
'
> > or http://1.1.13:8080/manage I get a "The page cannot be displayed"
> > response.
> >
> > Regards,
> >
> > Duncan C. Kinder
> > dckinder@mountain.net
> >
> > _______________________________________________
> > Zope maillist  -  Zope@zope.org
> > http://www.zope.org/mailman/listinfo/zope
> >
> > (To receive general Zope announcements, see:
> > http://www.zope.org/mailman/listinfo/zope-announce
> >
> > For developer-specific issues, zope-dev@zope.org -
> > http://www.zope.org/mailman/listinfo/zope-dev )
>
> _______________________________________________
> Zope maillist  -  Zope@zope.org
> http://www.zope.org/mailman/listinfo/zope
>
> (To receive general Zope announcements, see:
> http://www.zope.org/mailman/listinfo/zope-announce
>
> For developer-specific issues, zope-dev@zope.org -
> http://www.zope.org/mailman/listinfo/zope-dev )
>