[Zope] Starting ZOPE when you don't have access to the machine

Norman Khine khine@btinternet.com
Sun, 27 May 2001 13:40:10 +0100


Maybe I am getting confused ;^o somewhere, I saw a post that talked about
this -- sorry can't remember exactly.

I'll check the setup again.



-----Original Message-----
From: zope-admin@zope.org [mailto:zope-admin@zope.org]On Behalf Of Tim
Sent: 27 May 2001 13:00
To: Norman Khine
Cc: Zope
Subject: Re: [Zope] Starting ZOPE when you don't have access to the

Norman Khine wrote:
> Hello,
> I have a virtual server, ie sub-hosting with a virtual sub host, and have
> configured zope 2.3.2b2 with python 2.0 on freebsd 4.2
> I read in a previous post "somewhere" ;^) that if you start zope on a
> shell with ./start & and then close this connection the zope server will
> stop running.

I currently have three installations of Zope where I have never
physically touched (or been in the same room) with the machine it
is running on.  Everyone of them I started with ./start& through
either a telnet or ssh connection. I wait until the server comes
up then exit the connection:

       Zope version: Zope 2.2.0 (binary release, python 1.5.2,
       Python version: 1.5.2 (#10, Dec 6 1999, 12:16:27) [GCC]
       System Platform: linux2
       Process ID: 2240 (3076)
       Running for: 186 days 13 hours 42 min 42 sec

This one is almost 3,000 miles away.

So, I'm not sure why yours won't continue running, but it should.

Tim Cook, President - FreePM,Inc.
http://www.FreePM.com Office: (731) 884-4126
ONLINE DEMO: http://www.freepm.org:8080/FreePM

Zope maillist  -  Zope@zope.org
**   No cross posts or HTML encoding!  **
(Related lists -
 http://lists.zope.org/mailman/listinfo/zope-dev )