[Zope] Problem Starting Zope PANIC (300)

Todd Graham tgraham@speakeasy.net
Wed, 17 Apr 2002 06:45:48 -0700


You probably need to modify the start file and change the port(s) that zope
will use when starting. I believe there are three arguments that can be
passed -w portnumber "ZServer", -W portnumber "WebDAV" and -f portnumber
"ftp" .  Adding these arguments will change the ports that zope uses.  Here
is what mine looks like

>snip<

     $INST_HOME/z2.py -w80 -W9001\
      "$@"


----- Original Message -----
From: Roel Van den Bergh <roel@planetinterior.com>
To: Zope@Zope. Org <zope@zope.org>
Sent: Wednesday, April 17, 2002 6:32 AM
Subject: [Zope] Problem Starting Zope PANIC (300)


> For some time we have been using Zope onboth W2K and Redhat 7.2 without
any
> mayor problems.
> We have been following the mailing list for a while now, but this is new
to
> us.
>
> We just bought a brand new pre installed webserver (Dell PowerApp) running
> linux RH 7.0(?)
> After unpacking and installing Zope we tried to start Zope using ./start
and
> got the following error:
>
> 2002-04-17T12:45:45 PANC (300) z2 startup exception
> Traceback (innermost last):
> File /usr/local/zope/2-5-0/z2.py line 556, in ?
> File /usr/local/zope/2-5-0/ZServer/HTTPServer.py, line 320 in __init__
> File /usr/local/zope/2-5-0/ZServer/medusa/http_server.py, line 570 in
> __init__
> File /usr/local/zope/2-5-0/ZServer/medusa/asyncore.py, line 306, in bind
> error: (998, 'Address already in use')
>
> Apparantly Zope is trying to access a port already assigned.
> Is there any workaround this?
>
> TIA, Roel
>
>
>
>
> _______________________________________________
> Zope maillist  -  Zope@zope.org
> http://lists.zope.org/mailman/listinfo/zope
> **   No cross posts or HTML encoding!  **
> (Related lists -
>  http://lists.zope.org/mailman/listinfo/zope-announce
>  http://lists.zope.org/mailman/listinfo/zope-dev )
>