[Zope] Re: Problems using fsrecover.py from 2.5.1 with 2.4.3?
Thu, 6 Jun 2002 09:44:23 +0000 (GMT)
I am intested, because I was just planning to use fsrecover.py taking
it from 2.5.1 and putting it into 2.4.3 (the same as you). I have copied
fsrecover.py (2.5.1) to fsrecover2.py in 2.4.3.
Well, it seems to work, and a "top programmer" (in zope-dev mail-list)
told me that it should work.
So, do you think the problems comes from an incompatilibility of
fsrecover.py with Zope 2.4.3, or is because your database was really
damaged and fsrecover has done the "well" the work ??
Hi all I'm attempting to diagnose a Data.fs that might be wonky. I'm
sending a record of my attempt to the list in the hope that
other people are better at interpreting the results than I am. It was
written by this Zope: $ cat ./lib/python/version.txt
Zope 2.4.3 (binary release, python 2.1, linux2-x86) The fsrecover.py I'm
using comes from: Zope 2.5.1b1 (source release, python 2.1, linux2) I get
710849 errors like this: __main__.ErrorFound: invalid status, ^@, at
__main__.ErrorFound: invalid status, ^@, at 179898995 2068 errors like
this: __main__.ErrorFound: bad transaction length at 231384331 57 errors
like this: exceptions.SystemError: Failed to import class Trigger from
Products.ZPatterns.SkinScript.Components 39 errors like this:
__main__.ErrorFound: invalid status, é, at 33731550 with status values
such as é, ^R, <, ç, ê, ... 3 errors like this:
'\x03C\x04\xb0\xf8\xa2\xe7\xb3') 2 errors like this: exceptions.KeyError:
^@^@^@^@^@^C0\ 2 errors like this: exceptions.ImportError: cannot import
name NullProvider 1 error like this: exceptions.ImportError: cannot
import name Factory and fsrecover finishes with the message: 139059006
bytes removed during recovery Before: 242946201 Apr 9 16:05 Data.fs
After: 103887195 May 1 14:39 Data.fs.fsrecover I can start a Zope on the
"recovered" Data.fs without problems,
and access it through a browser. It works fine, until I try
to access certain ZClasses stored on Racks (eg. 'License'
instances raise KeyErrors, 'Customer' instances are fine). Then
I get KeyErrors, with this in the log: ------
2002-05-01T13:14:11 ERROR(200) ZODB Couldn't load state for
Traceback (innermost last):
File /usr/local/zope/2-4-3/lib/python/ZODB/Connection.py, line 519, in
line 588, in load
line 564, in _load
------ For the record, during startup, Zope warns: WARNING: Python C API
version mismatch for module DynPersist:
This Python has API version 1010, module DynPersist has version 1007.
We haven't been able to successfully recompile the dynpersist module,
so we've been ignoring the warning. --
Saludos de Julián
Foro Wireless Madrid