[Zope] Zope startup msgs

John Poltorak jp at warpix.org
Wed Mar 10 09:24:46 EST 2004


On Wed, Mar 10, 2004 at 02:11:06PM +0000, Chris Withers wrote:
> John Poltorak wrote:
> 
> >>>I'm running Zope on OS/2 because someone ported 2.6.0 a while ago.
> >>>This 'porting' actually amounted to knowing that eight lines needed to be 
> >>>removed from z2.py. The same lines needed to be removed from 2.6.4, but 
> >>>2.7.0 sounds like a whole new ball game. 
> >>
> >>What eight lines were they?
> > 
> > See attached diff.
> > 
> > It due to the OS/2 port of Python not being able to handle sticky bits.
> 
> Ah, right. What happens if you try 2.7.0?

Configure _appears_ to work OK, but something fails right at the end. 
Haven't figured out what just yet.

This is what happens as it fails:-

running build
running build_scripts
creating U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/mkzeoinstance.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/mkzopeinstance.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/check_catalog.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying utilities/load_site.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/requestprofiler.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/zpasswd.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/testrunner.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/copyzopeskel.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/compilezpy.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
copying and adjusting utilities/decompilezpy.py -> U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts
ECHO is on.
Zope built. Next, do "\make install\" \(or "\make instance\"
to run a Zope instance directly from the build directory\).
ECHO is on.
"U:\USR\BIN\PYTHON.EXE" "U:/unixos2/workdir/Zope-2.7.0/setup.py" \
            build --build-base="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3" --build-lib="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-lib" --build-scripts="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts" --build-temp="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-temp"
running build
running build_py
running build_ext
running build
running build_py
running build
running build_scripts
"U:\USR\BIN\PYTHON.EXE" "U:/unixos2/workdir/Zope-2.7.0/setup.py"  install \
   --home="/opt/Zope-2.7" --build-base="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3" --build-lib="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-lib" --build-scripts="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-scripts" --build-temp="U:/unixos2/workdir/Zope-2.7.0/build-base/python-2.3/build-temp" 
invalid command name ''
make: *** [install] Error 1


Maybe it's a shell problem, I don't know...  The invalid command name has 
me puzzled.



 
> Chris
> 
> -- 
> Simplistix - Content Management, Zope & Python Consulting
>             - http://www.simplistix.co.uk
> 



-- 
John






More information about the Zope mailing list