[Zope] how to get more verbose logging

[Dave Kuhlman]

On Wed, Nov 10, 2004 at 05:43:06PM +0100, Jonas Meurer wrote:
> hello,
> 
> at trying to debug a problem that causes zope to crash, a more verbose
> logging would be very usefull. I already use the event.log, but up to
> now i had EVENT_LOG_SEVERITY at -100 (BLATHER), what worked quite well.
> 
> now i raised the environment variable to -300, in the hope to get TRACE
> logging, as mentioned in the Zope 2.6 documentation.
> 
> anyway, event.log still doesn't give logs lower than BLATHER. I'm not
> absolutely sure whether it should, but normally TRACE should already
> give some more information at starting the process, shouldn't it.
> 
> even if i produce the problem that crashes zope, the lowest log is
> BLATHER, and i get no more verbose logging output.
> 
> i tested this in zope 2.6.4 with python2.1 and python2.2, and both don't
> provide any new information.
> 
> any suggestions?
> 

You could try raising the logger level to "ALL" in the logger
sections of instance/etc/zope.conf.

You might also try turning on the trace logger. The trace logger
section was commented out in etc/zope.conf by default in my
instance.

Dave

-- 
Dave Kuhlman
http://www.rexx.com/~dkuhlman