[Zope] How to upgrade Python in older Zope?

Doyon, Jean-Francois jdoyon at NRCan.gc.ca
Tue Sep 11 13:00:41 EDT 2007


Alternatively, possibly, you could split your storage into multiple
Data.fs files?

I'm not sure how you'd migrate the object reliably (never done it
myself), but it should be doable one would think?

-----Original Message-----
From: zope-bounces at zope.org [mailto:zope-bounces at zope.org] On Behalf Of
Tit-Liviu Leontin
Sent: September 11, 2007 12:55
To: zope at zope.org
Subject: Re: [Zope] How to upgrade Python in older Zope?

Paul,


Thank you for the quick reply! I'm aware of the risk, but it seemed the
easiest way to circumvent a limitation. I guess it would be even easier
to find Python 2.1.3 built with LFS enabled for Windows. :-)

The reason I'm reluctant to touch anything is that I use Zope for
OpenFlow, and I depend on its requirements. Currently it's OpenFlow 0.7
IIRC, while the development stopped at 1.3 and the upgrade of that
application is a pain I'm trying to avoid. Also, I'm looking for the
easiest possible way out, because in a month or two the entire
application will be replaced with another solution.

If there is no other way than take Zope through a few updates, then I'll
give that a shot when I get some time to tinker with this.


Thanks again, keep the ideas coming!
Titel


----- Original Message ----
From: Paul Winkler <pw_lists at slinkp.com>
To: zope at zope.org
Sent: Tuesday, September 11, 2007 6:30:12 PM
Subject: Re: [Zope] How to upgrade Python in older Zope?

On Tue, Sep 11, 2007 at 07:36:18AM -0700, Tit-Liviu Leontin wrote:
> Folks,
> 
> 
> I desperately need support for large filesystem so the data.fs file
can exceed 2 GB.
> 
> I can only make minimal changes to the existing set-up, which consists
of Zope 2.5.1 (binary release, with Python 2.1.3) on Windows Server 2003
and NTFS.
> 
> >From what I've read, the issue is with the old Python not having LFS
enabled, so I thought I'd just upgrade it to 2.2.3 which has LFS
enabled.
> 
> The question is, how do I do that? Windows installer for Python
doesn't know what to upgrade in the Zope install, so I'm thinking to
copy the right files from the extracted Python 2.2.3 in Zope folders.

That sounds like a really bad idea. From the Zope 2.5.1 release notes:

  * Zope requires Python 2.1 (Python 2.2 is currently *not* supported)


You should NOT assume that warning was put there for no reason :-)

Also, there's not a whole lot of expertise in this community on building
for Windows; we seem to be a linux/unix-heavy crowd. You'd better stick
to the binary releases and not mess with them, unless you can find a
bona-fide expert to help you.  Anyone? :-)

Meanwhile you might try migrating a *copy* of your Data.fs to Zope first
to Zope 2.6.4 (still uses Python 2.1.x) and then to Zope 2.7.7 (uses
Python 2.3.x).

FWIW I recall 2.5 to 2.6 being a painless upgrade.  I think 2.7 was a
little more involved. The most likely problem to watch out for is
security-related issues: your code might accidentally rely on a security
weakness that was subsequently tightened, so you get permission denied
at unexpected times until your code and/or configuration is fixed.
Install and turn on VerboseSecurity, it's a big help with things like
that.


-- 

Paul Winkler
http://www.slinkp.com
_______________________________________________
Zope maillist  -  Zope at zope.org
http://mail.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists -
 http://mail.zope.org/mailman/listinfo/zope-announce
 http://mail.zope.org/mailman/listinfo/zope-dev )



_______________________________________________
Zope maillist  -  Zope at zope.org
http://mail.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists - 
 http://mail.zope.org/mailman/listinfo/zope-announce
 http://mail.zope.org/mailman/listinfo/zope-dev )


More information about the Zope mailing list